|
MOTOCULTIVATORS
One-axle
TARAL tractors or Motocultivators are used for a wide variety of
purposes ncluding cultivating, pesticide application, grass cutting,
irrigation, digging, uprooting potatoes.Farmers choose these
machines for their reliability, economy and multipurpose features.
The
wheel-track width is adjustable. The handlebar can be moved
horizontally or vertically to maximum comfort. It rotates 180
degrees, allowing the tractor to turn around in the opposite
direction for grass cutting equipment.
Brakes
which work independently of each other are manipulated to the right
or left by hand, and can be used for parking and making easy turns
in narrow areas.
In
case of an emergency, the engine stop system is activated by
releasing the arm on the handlebar.
Motocultivators
have a powerful transmission mechanism with a choice of four forward
and two reverse speeds.
It
has two separate power take of shafts and differential gear system
which can be locked to maintain a straight path for the tractor
along a line while cultivating.
Many
accessories and implements are avaible.Tillers, ploughs, water
pumps, sprayers and mowers can easily be attached to the tractor,
and the use of a trailer transforms it into a vehicle.
TARAL
one-axle tractors equipped optionally with
lights can be used at night. Those with a starter provide our
farmers an easy start-up of the diesel engine.
TECHNICAL
CHARACTERISTICS
| Model |
51
S |
22
S |
19
S |
| Engine |
Lombardini
3 LD 510 |
Ruggerini
RY 50 |
Kipor
KM 170 |
Briggs&Stratton
İntek 206
|
| One
cylinder, four strokes, air cooler, diesel |
one
cylinder, four strokes, air cooler, with gasoline |
| Power
(hp) |
12 |
6.5 |
3,4/3,8 |
6.5 |
| Cylinder
volume (cm3) |
510 |
224 |
219 |
206 |
| Turn
per minute (d/d) |
3000 |
3600 |
3000/3600 |
3600 |
| Clutch |
One
disc, dry, mechanical control |
Dry
conic clutch |
| Gearbox |
4
forward, 2 reverse controlling with shift bar |
2
forward,
2
reverse
|
1
forward,
1
reverse
|
| Differential |
4
conic planetary gears, mechanical control on handlebar |
|
| Speeds
(km/h) |
Forward:
1,3-2,6-6,8-13,5 Reverse: 2,8-5,6 |
Forward:
1,1-1,4 Reverse: 1,3-1,7 |
Forward:
1,2 Reverse: 1,5 |
| Power
take-off-1 |
Axle
motion independent, two turns (540-800 d/d) shaft with key 20x17 DIN
5482 |
Axle
motion dependent,1 turn |
| Power
take-off-2 |
Axle
motion dependent, it turns 23 times in per turns of wheel. 20x17 DIN
5482 |
- |
| Brakes |
Control
with hand |
- |
| Cultivator
Measurements (cm) |
75-80-90 |
58 |
45 |
| Wheel
widths adjustable |
STD
6.50x12 (Optionally 5.00x12) |
4.00x8 |
3.50x6 |
| Weight
with wheels (kg) |
185 |
90 |
85 |
| Measurements
with wheels (ExBxY) cm |
90x210x110 |
85x153x80 |
80x153x80 |
|